The company has passed ISO9001:2008 quality management system certification.
- Differences between Rising Stem Gate Valves and Non-Rising Stem Gate Valves
Differences between Rising Stem Gate Valves and Non-Rising Stem Gate Valves
- KV value of BS standard globe valve
KV value of BS standard globe valve
- SEDELON Valve Knowledge Science-An Introduction to RGD Elastomer (Delta-ring)
SEDELON Valve Knowledge Science-An Introduction to RGD Elastomer (Delta-ring)
Penetrant Testing(PT)
By applying penetrant, the redundant parts is removed with a detergent, and if necessary, applying imaging agent to obtain an indication of some defects opening on the surface in the part.
Penetration testing is based on the liquid to the solid's wetting ability and capillary phenomenon in the physics, first let contain dyes and high penetration of the liquid penetrant, coated to the surface of the tested workpiece, due to the liquid's wetting action and capillary action, the penetrant infiltration into the surface opening defects. After applying the penetrant, it is permitted to sit on the surface for a specified period of time (the "penetrant dwell time"), then the part is carefully cleaned to remove excess penetrant from the surface. A light coating of developer is then be applied to the surface and given time ("developer dwell time") to allow the penetrant from any voids or fissures to seep up into the developer, creating a visible indication.